Get pressing quotes

Guide

Vinyl record sizes and speeds explained

7-inch, 10-inch and 12-inch records at 33⅓ and 45 rpm: what each is used for, typical playing time per side, and how to choose.

Modern records come in three main sizes and two main speeds. The combination sets how much music fits on a side and how it sounds.

FormatTypical useComfortable time per side
7-inch, 45 rpmSinglesabout 4–6 minutes
7-inch, 33⅓ rpmEPs, longer singlesabout 6–8 minutes
10-inch, 45 rpmEPs, special editionsabout 8–10 minutes
10-inch, 33⅓ rpmEPs, short albumsabout 12–15 minutes
12-inch, 45 rpmDJ singles, audiophile reissuesabout 12–15 minutes
12-inch, 33⅓ rpmAlbums (LPs)about 18–22 minutes

These are practical guidelines, not hard limits. Longer sides are possible, but the groove must be cut narrower and quieter, which lowers volume and bass. Mastering and cutting engineers will advise on your specific material.

Why 45 rpm sounds better

At a higher speed, more groove passes the stylus each second, so high frequencies and transients are reproduced more accurately. The trade-off is less time per side.

78 rpm

Shellac 78s were the standard before the LP. They need a turntable with a 78 setting and a suitable stylus.

Try the side length calculator to see how your own track list fits each format.

Last reviewed November 2026. All guides